step-by-step guide on how to reset a tripped circuit breaker

​Resetting a tripped breaker is a fairly simple process, but it requires caution and some basic knowledge of your electrical system. Here are the steps you can follow:
​

1. Locate the tripped breaker: In most cases, you can tell which breaker has tripped by looking at the position of the switches on the panel. The one that has flipped to the opposite side from the others is the one that has tripped.
2. Turn off all the devices: Before you reset the breaker, you need to turn off all the devices that are connected to the circuit it controls. This will prevent any sudden power surges or damage to the devices.
3. Reset the breaker: To reset the breaker, firmly push the switch all the way to the off position, and then back to the on position. You may need to apply some force to the switch to get it to move. If the switch immediately trips again, this indicates that there is a problem with the circuit or the device connected to it, and you should call an electrician to investigate.
4. Turn on the devices: Once you have reset the breaker, you can turn the devices back on one at a time to make sure everything is working properly.

It's important to remember that tripped breakers are a safety feature designed to protect you and your electrical system from overloading and potentially causing a fire.  If you're uncomfortable with resetting the tripped breaker yourself, you can seek the assistance of local Richmond Hill electricians such as Electricians Richmond Hill to do it for you.  If you experience frequent tripped breakers, it may be a sign that you need an upgrade electrical panel service, or add more circuits to handle your power needs.